Framed lattice R/224 for outdoor fencing. Holes of 36 mm. Horizontal format. Lattice thickness of 20 mm. Frame of 68 mm. Sizes: Entire (900 x 1800 mm) and Half (450 x 1800 mm). Wood types: Insignis pine, Sweden pine.
Glued with anti-humidity marine glue.
Overlapping slats 34 mm wide x 10 mm thick. Sanded on both sides.
Frame with thickness of 68 mm.
Holes of 36 mm between the slats.
Various wood types: Insignis pine, Sweden pine.
Sizes: Entire (900x1800 mm) and Half (450x1800 mm).
Additional height: All lattices have and additional height of 25 cm.
If you do not need the additional height of the upper and/or lower part, you can get the lattice delivered from the factory directly without it..
Colors: Untreated (raw), Lasures (Brown, Walnut and Teak), Submersion resins (White and Green)
Guaranteed article
The lasures used are of the prestigious brand "Xylazel".
It is advisable to do the maintenance of an outdoor lattice every 2 - 4 years.
The lattices painted in White or Green by submersion with resins do not need any maintenance at all.
If, after having finished your work, you need to touch up some color, your supplier will provide you with a can of 150 g without any charge.
All painted lattices are treated for Risk III.
The lattices are assembled using metal "pins" and glued with anti-humidity marine glue for outdoor use.
We purchase all our wood from sustainable forests. |
Our products that are painted by submersion and autoclave-treated are not toxic when contact to the skin is established. |
 |  |  | © CAT' MADER, S.L. • Murcia, 23 - Ind. Est. San Juan CATRAL (Alicante) Spain Telf. +34 965 723 032 • FAX. +34 966 787 338 |  info@catmader.es |
